A Wireguard comparison DB

This device is probably one of the newest, and the one with high expectation I have tested:

root@OpenWrt:~/wg-bench# ubus call system board
{
	"kernel": "6.1.77",
	"hostname": "OpenWrt",
	"system": "ARMv8 Processor rev 0",
	"model": "Bananapi BPI-R4",
	"board_name": "bananapi,bpi-r4",
	"rootfs_type": "squashfs",
	"release": {
		"distribution": "OpenWrt",
		"version": "SNAPSHOT",
		"revision": "r25210-b0b8fd436f",
		"target": "mediatek/filogic",
		"description": "OpenWrt SNAPSHOT r25210-b0b8fd436f"
	}
}

root@OpenWrt:~/wg-bench# ./benchmark.sh -R
Connecting to host 169.254.200.2, port 5201
Reverse mode, remote host 169.254.200.2 is sending
[  5] local 169.254.200.1 port 43360 connected to 169.254.200.2 port 5201
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec   154 MBytes  1.29 Gbits/sec                  
[  5]   1.00-2.00   sec   152 MBytes  1.27 Gbits/sec                  
[  5]   2.00-3.00   sec   151 MBytes  1.26 Gbits/sec                  
[  5]   3.00-4.00   sec   149 MBytes  1.25 Gbits/sec                  
[  5]   4.00-5.00   sec   152 MBytes  1.28 Gbits/sec                  
[  5]   5.00-6.00   sec   151 MBytes  1.27 Gbits/sec                  
[  5]   6.00-7.00   sec   150 MBytes  1.26 Gbits/sec                  
[  5]   7.00-8.00   sec   150 MBytes  1.26 Gbits/sec                  
[  5]   8.00-9.00   sec   150 MBytes  1.26 Gbits/sec                  
[  5]   9.00-10.00  sec   151 MBytes  1.26 Gbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  1.48 GBytes  1.27 Gbits/sec    0             sender
[  5]   0.00-10.00  sec  1.47 GBytes  1.27 Gbits/sec                  receiver

iperf Done.
1 Like