802.11r VLAN multiple SSID

[psherman]

@jb2002

My problem is using 802.11r with multiple acess points.

I don't recommend 802.11r in most cases. Take a look at this thread:

Fast / seamless roaming through ethernet with OpenWRT

Hi, in my house I want to have only one WiFi network through four wired APs. So I reasearched a bit and found that I need a feature which is (sometimes) referred to as "fast roaming" or "seamless roaming". Is OpenWRT supporting this somehow? Is OpenWRT supporting this through cabled connections? The situation: Currently I am renovating a house that I bought and planning the WiFi network right now. I am using OpenWRT on my router for several years now, so I got some experience with flashing…

And specifically this post from another thread:

Setup house 802.11r RE305/RE200

I want to echo the sentiment that 802.11r is not needed in most situations. It is a common misconception that this standard is either required for roaming or that it will dramatically increase roaming performance (reduce roaming latency, etc.). Fast roaming (802.11r) is not required for roaming to work in general. Roaming is a client (sta mode) side operation and relies on two factors: A well tuned RF environment -- that is, the placement, channel selection and power level adjustment (i.e. r…