23.05-RC and WPEQ-405AX(QCN9074)

I have the WEPQ-405AX in a TurrisOmnia and it doesn't work.
It is properly detected by "lspci" and also shown in the Wireless section.
I am even able to get information via the "iw" tool.
But it doesn't scan for network and also not works as AP.
I've seen in syslog that "hostapd" fails, so tired it manually with debugging:

root@OpenWrt:~# /usr/sbin/hostapd /var/run/hostapd-phy3.conf
Could not set interface phy3-ap0 flags (UP): Operation timed out
nl80211: Could not set interface 'phy3-ap0' UP
nl80211: deinit ifname=phy3-ap0 disabled_11b_rates=0
nl80211 driver initialization failed.
phy3-ap0: interface state UNINITIALIZED->DISABLED
phy3-ap0: AP-DISABLED
phy3-ap0: CTRL-EVENT-TERMINATING
hostapd_free_hapd_data: Interface phy3-ap0 wasn't started
root@OpenWrt:~#
root@OpenWrt:~#
root@OpenWrt:~# /usr/sbin/hostapd /var/run/hostapd-phy3.conf
Could not set interface phy3-ap0 flags (UP): No buffer space available
nl80211: Could not set interface 'phy3-ap0' UP
nl80211: deinit ifname=phy3-ap0 disabled_11b_rates=0
nl80211 driver initialization failed.
phy3-ap0: interface state UNINITIALIZED->DISABLED
phy3-ap0: AP-DISABLED
phy3-ap0: CTRL-EVENT-TERMINATING
hostapd_free_hapd_data: Interface phy3-ap0 wasn't started

In the "dmesg" i can see:

[   38.006383] ath11k_pci 0000:02:00.0: failed to vdev 0 create peer for AP: -110
[   43.046383] ath11k_pci 0000:02:00.0: Timeout in receiving vdev delete response
[  705.171031] ath11k_pci 0000:02:00.0: failed to vdev 1 create peer for AP: -110
[  708.220822] ath11k_pci 0000:02:00.0: ce desc not available for wmi command 20482
[  708.228239] ath11k_pci 0000:02:00.0: failed to submit WMI_VDEV_DELETE_CMDID
[  708.235232] ath11k_pci 0000:02:00.0: failed to delete WMI vdev 1: -105
[ 1309.291648] ath11k_pci 0000:02:00.0: ce desc not available for wmi command 16387
[ 1309.299073] ath11k_pci 0000:02:00.0: failed to send WMI_PDEV_SET_PARAM cmd
[ 1309.305978] ath11k_pci 0000:02:00.0: failed to enable PMF QOS: (-105
[ 1326.410912] ath11k_pci 0000:02:00.0: ce desc not available for wmi command 16387
[ 1326.418337] ath11k_pci 0000:02:00.0: failed to send WMI_PDEV_SET_PARAM cmd
[ 1326.425241] ath11k_pci 0000:02:00.0: failed to enable PMF QOS: (-105
[ 1387.927388] ath11k_pci 0000:02:00.0: ce desc not available for wmi command 16387
[ 1387.934818] ath11k_pci 0000:02:00.0: failed to send WMI_PDEV_SET_PARAM cmd
[ 1387.941722] ath11k_pci 0000:02:00.0: failed to enable PMF QOS: (-105
[ 1424.245189] ath11k_pci 0000:02:00.0: ce desc not available for wmi command 16387
[ 1424.252615] ath11k_pci 0000:02:00.0: failed to send WMI_PDEV_SET_PARAM cmd
[ 1424.259520] ath11k_pci 0000:02:00.0: failed to enable PMF QOS: (-105

Anyone having same problems??
I have a Xiamon AX9000 with where the QCN9074 is properly working.

Just a small feedback. Card seems to work on a BanaPI-R3. Using it there doesn't produce such errors and shows that the AP is up. Well never the less none of my devices can find it :-).
I'll check deeper and report.

I am able to see and to cofnigure the adapter on OpenWRT snapshot. It is also seen by my devices but no connection is possible.
There are also no further errors in the syslog, although i've set hostapd level to "0".
Maybe somebody is havin similar problems and has solutions.