Hi,
yesterday i installed the 19.07 snap on a netgear r6260 and having 2 network related issues:
-
Wan Interface does only receive a IP by dhcp when cable modem is restarted.
Means, every time i restart the router i need to restart the cable modem too.
The Cable Modem is a Technicolor CGA2121.
I tried the Broadcast Flag in wan interface options but it doesnt solve it.
The oem firmware on the router hasnt this problem. -
Wlan, here is only the 2,4 Radio up and configured but this morning i checked the system state and the wlan wasnt up anymore. Restart Wlan interface doesnt bring it up and i have the following messages in the system.log:
Thu Jan 16 06:25:53 2020 daemon.notice netifd: radio0 (28339): WARNING: Variable 'data' does not exist or is not an array/object
Thu Jan 16 06:25:57 2020 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy0.conf (phy wlan0) --> new PHY
Thu Jan 16 06:25:57 2020 daemon.err hostapd: Could not read interface wlan0 flags: No such device
Thu Jan 16 06:25:57 2020 daemon.notice hostapd: nl80211: Driver does not support authentication/association or connect commands
Thu Jan 16 06:25:57 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Thu Jan 16 06:25:57 2020 daemon.err hostapd: Could not read interface wlan0 flags: No such device
Thu Jan 16 06:25:57 2020 daemon.err hostapd: nl80211 driver initialization failed.
Thu Jan 16 06:25:57 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Thu Jan 16 06:25:57 2020 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started
Thu Jan 16 06:25:57 2020 daemon.notice netifd: radio0 (28407): Command failed: Invalid argument
Thu Jan 16 06:25:59 2020 user.notice root: ip link set dev wlan0 up
Thu Jan 16 06:25:59 2020 daemon.notice netifd: radio0 (28407): ip: SIOCGIFFLAGS: No such device
Thu Jan 16 06:25:59 2020 daemon.notice netifd: radio0 (28407): Interface 0 setup failed: IFUP_ERROR
Thanks in advance, wbr
Thomas