18.06.3 how is it going? --> 18.06.4 --> 19.07 coming soon

You should always back up your config for reference. Especially if you moving from ar71xx (deprecated) to ath79 (replacement), though much has been done to make it smooth, it may require some tweaks.


do you know if linksys wrt or d-link d810l - mt7621 will be config compatible 100%?

is it only what you talk about is ar71xx to ath79 that has incompatibles?

It should be compatible, but it is never 100% guaranteed.


Is anyone having an issue with LuCI in the 18.06.3 builds?

What "issue"?

Occurs on snapshot and 18.06.3 (no longer available at this time).

how come https://downloads.openwrt.org/releases/18.06.3 was there like 2 days ago, now on Jun 25 2019 it is missing?

i built it on D-LINK DIR 860L B1 and Linksys WRT perfectly, what target are you experiencing errors? (On R-PI3 I could not build it)

buildbot error but there is a topic




1 Like

See my link above (powerpc_464fp). Also see: Uci_load_validate: not found - this user also lost LuCI on that first build of .3

Most current snapshot (OpenWrt SNAPSHOT, r10325-b16faf9bc7/LuCI git-19.175.17568-86fd703-1) is working now though.

1 Like

but is it because of the wrong buildbot error, or is it because of a self build?
because with my self build it is workikng perfectly.

it looks like the buildobots are crunching by now with proper builds, here is this email:

1 Like

Slightly later, than March :sunglasses:

i got a few (3) targets the builds perfectly:

(Linksys WRT, D-LINK DIR 860L B1, R-PI 3 and all latest NodeJs v12 and many pre built binary packages.)

There has not been any problem in the actual building of 18.06, 19.07 or master, but just in the buildbot's handling of git context, which led to broken repo contents at the download site.

1 Like

in my case

I have issue building IPX4018 using 18.06.3 the resulting image is too large to fit (it does not matter if i choose less packages)

19.07 builds the same target without issue

what is this new version 18.06.4? it was tagged about 14 hours ago...

$ git log --pretty=oneline v18.06.3..v18.06.4 
f6429577c5 (tag: v18.06.4) OpenWrt v18.06.4: adjust config defaults
ef686b7292 uqmi: bump to latest git HEAD
3dc740257b uqmi: inherit firewall zone membership to virtual sub interfaces
a2c22b8776 uqmi: fix PIN_STATUS_FAILED error with MC7455 WCDMA/LTE modem
d5ff0897cb kernel: bump 4.14 to 4.14.131
18266fc6c0 kernel: bump 4.9 to 4.9.184
5e771160b8 kernel: bump 4.14 to 4.14.130
9c6fb1d67a kernel: bump 4.14 to 4.14.129
6c1bef833d kernel: bump 4.9 to 4.9.183
467adaf6c5 OpenWrt v18.06.3: revert to branch defaults

thanks heads up, i just noticed some of the changelogs, looks like some kernel updates non critical that i notice

Not to complain but i find it odd were talking about 18.06.4 with 18.06.3 not even fully compiled and released to general public
Also 19.07 soon to drop... I assume the naming conventions matches the YEAR.Month

My only experience with building is some Debian vm with pre installed packages(precompiled packages) and image builder (https://openwrt.org/docs/guide-user/additional-software/imagebuilder) to add things like ssh/openvpn and now wireguard to the vanilla build .

I'm using the wiki https://openwrt.org/docs/guide-developer/build-system/start, but i'm unsure how to even start, because I know i install git, but i don't use it on a weekly or monthly basis so im not even sure how to not point my branch to master and 18.06.4. Perhaps someone can point me to a different guide in the interim?

I've been itching to flash since the announcement of the release, and so if anyone can link me a guide to build for 18.06.4 or even 18.06.3 because i've been waiting a week to download the ar71xx imagebuilder for archer c7 v2 to add ssl. I'll continue to look around. I might wait for the 19.07 releases to be stable later down the road.

here's one

1 Like