I want to say hello; I followed Your diskussion for a while and now I'll try to set up my wrt350nv2 with OpenWrt. So let's go...
@maddes.b Your tutorials and summaries were very helpful, thank You!
After a couple of reflashing, the latest snapshot and LuCI are working.
But now I'm confused, because my wlan will not get up.
I have configured the wrt as N-client with WPA2-PSK.
$ uci show
wireless.wlan0=wifi-device
wireless.wlan0.type=mac80211
wireless.wlan0.channel=11
wireless.wlan0.disabled=1
wireless.@wifi-iface[0]=wifi-iface
wireless.@wifi-iface[0].device=wlan0
wireless.@wifi-iface[0].network=lan
wireless.@wifi-iface[0].mode=sta
wireless.@wifi-iface[0].encryption=psk2
wireless.@wifi-iface[0].key=deadbeef
wireless.@wifi-iface[0].ssid=openWRT
Seems to be OK.
My AP (WNR834B) displays the connection at 89% ... 49% ... off ... 89% ... and so on.
Serialconsole shows in a loop:
...
br-lan: topology change detected, propagating
br-lan: port 5(wlan0) entering forwarding state
br-lan: port 5(wlan0) entering disabled state
br-lan: topology change detected, propagating
br-lan: port 5(wlan0) entering forwarding state
br-lan: port 5(wlan0) entering disabled state
...
Is that still an issue?
Or is a stable N/WPA2 link possible and I just have to configure something elsewhere.
@dirkNL
thanx for the advice concerning 'firstboot', but my wrt300nV2 hangs afterwards.
Serialconsole shows in a loop:
mini_fo_lookup: ERR from storage dentry, lookup failed.
mini_fo_d_delete: negative dentry passed.
mini_fo_d_release: no private data.
mini_fo_lookup: ERR from storage dentry, lookup failed.
mini_fo_d_delete: negative dentry passed.
mini_fo_d_release: no private data.
.......
After swiching off an on, it started clean, so no problem at all.
Update:
The unstable connection results of a different Fragmentation Threshold in my WNR834B.
Nevertheless, there is a handshake with the AP by now, but no data transmission.
I'll try a tcpdump....
(Last edited by mrk on 1 Apr 2009, 15:32)