Hi all,
when I apply the patch (fix_alignment2.patch) to last trunk 14746 I get this error :
misteroX@ubuntu8:/working2/openwrt/dg834gt/14746$ patch -p0 < fix_alignment2.patch
patching file target/linux/brcm63xx/files/include/asm-mips/mach-bcm63xx/bcm_tag.h
patching file target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/board_bcm963xx.c
Hunk #1 succeeded at 206 with fuzz 2 (offset 46 lines).
Hunk #2 FAILED at 298.
1 out of 2 hunks FAILED -- saving rejects to file target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/board_bcm963xx.c.rej
patching file target/linux/brcm63xx/files/drivers/mtd/maps/bcm963xx-flash.c
Hunk #3 FAILED at 199.
1 out of 4 hunks FAILED -- saving rejects to file target/linux/brcm63xx/files/drivers/mtd/maps/bcm963xx-flash.c.rej
patching file target/linux/brcm63xx/image/Makefile
Reversed (or previously applied) patch detected! Assume -R? [n]
Apply anyway? [n] y
Hunk #1 succeeded at 53 with fuzz 1 (offset 8 lines).
Hunk #2 FAILED at 102.
1 out of 2 hunks FAILED -- saving rejects to file target/linux/brcm63xx/image/Makefile.rej
patching file scripts/brcmImage.pl
Is part of a fix already present in last trunk?
At compile time I get the following error :
CC arch/mips/bcm63xx/dev-enet.o
CC arch/mips/bcm63xx/dev-wdt.o
CC arch/mips/bcm63xx/early_printk.o
CC arch/mips/bcm63xx/boards/board_bcm963xx.o
arch/mips/bcm63xx/boards/board_bcm963xx.c:209: error: redefinition of 'board_DV201AMR'
arch/mips/bcm63xx/boards/board_bcm963xx.c:164: error: previous definition of 'board_DV201AMR' was here
make[7]: *** [arch/mips/bcm63xx/boards/board_bcm963xx.o] Error 1
make[6]: *** [arch/mips/bcm63xx/boards] Error 2
make[5]: *** [arch/mips/bcm63xx] Error 2
make[5]: Leaving directory `/working2/openwrt/dg834gt/14746/build_dir/linux-brcm63xx/linux-2.6.27.19'
make[4]: *** [/working2/openwrt/dg834gt/14746/build_dir/linux-brcm63xx/linux-2.6.27.19/.image] Error 2
make[4]: Leaving directory `/working2/openwrt/dg834gt/14746/target/linux/brcm63xx'
make[3]: *** [install] Error 2
make[3]: Leaving directory `/working2/openwrt/dg834gt/14746/target/linux'
make[2]: *** [target/linux/install] Error 2
make[2]: Leaving directory `/working2/openwrt/dg834gt/14746'
make[1]: *** [/working2/openwrt/dg834gt/14746/staging_dir/target-mips_uClibc-0.9.29/stamp/.target_install] Error 2
make[1]: Leaving directory `/working2/openwrt/dg834gt/14746'
make: *** [world] Error 2
With trunk 14253 I had not this problem on my DG834GT.
Makefile has these changes :target/linux/brcm63xx/image/Makefile
# DG834GT
$(call Image/Build/CFEOLD,$(1),96348GW-10,6348)
How can I do?
Thanks
MisteroX