OpenWrt Forum Archive

Topic: How I get the ADM5120 (Edimax BR6104KP) LEDs working ?

The content of this topic has been archived on 27 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
weiszespferd
14 Dec 2007, 21:52

How I get the ADM5120 (Edimax BR6104KP) LEDs working ? I loaded the nmodules

leds_gpio
leds_adm5120
ledtrig_adm5120_switch

but what else I have to do ?

Post #2
lao
19 Dec 2007, 12:30

echo "port_state"> /sys/class/leds/wan_speed/trigger
echo "port_state"> /sys/class/leds/wan_lnkact/trigger
echo "speed"> /sys/class/leds/wan_speed/port_state
echo "link_act"> /sys/class/leds/wan_lnkact/port_state
echo "port_state"> /sys/class/leds/lan1_speed/trigger
echo "port_state"> /sys/class/leds/lan1_lnkact/trigger
echo "speed"> /sys/class/leds/lan1_speed/port_state
echo "link_act"> /sys/class/leds/lan1_lnkact/port_state
echo "port_state"> /sys/class/leds/lan2_speed/trigger
echo "port_state"> /sys/class/leds/lan2_lnkact/trigger
echo "speed"> /sys/class/leds/lan2_speed/port_state
echo "link_act"> /sys/class/leds/lan2_lnkact/port_state
echo "port_state"> /sys/class/leds/lan3_speed/trigger
echo "port_state"> /sys/class/leds/lan3_lnkact/trigger
echo "speed"> /sys/class/leds/lan3_speed/port_state
echo "link_act"> /sys/class/leds/lan3_lnkact/port_state
echo "port_state"> /sys/class/leds/lan4_speed/trigger
echo "port_state"> /sys/class/leds/lan4_lnkact/trigger
echo "speed"> /sys/class/leds/lan4_speed/port_state
echo "link_act"> /sys/class/leds/lan4_lnkact/port_state

Post #3
weiszespferd
19 Dec 2007, 20:25

Thank you!

The discussion might have continued from here.